WARRANTY INFORMATION

Submit Your Consumer Warranty Request Here

The limited warranty set forth below is given by SATCO Products Inc. with respect to certain LED and CFL lighting products (“Product”), when delivered in new condition and in its original package, is warranted against defects in material and workmanship for a period of 2 to 5 years (depending upon product type; see below) from the original date of purchase, based on 3 hours of use per day. Defective Products should be returned to SATCO. Contact SATCO to obtain return authorization. Once returned product is proven defective upon inspection by SATCO, product will be repaired or exchanged as determined by SATCO.

This limited warranty covers all defects encountered in normal and recommended use of the product, and does not apply to cases below:

(A) Loss or damage to the product due to abuse, mishandling, alteration, accident, electrical current fluctuation, failure to follow operating, maintenance or environmental instructions prescribed by SATCO. See safety notices in or on the product packaging.

(B) Service provided by someone other than SATCO or an authorized service provider.

(C) Warranty is void if product is not used for the intention which product was manufactured.

For Light Emitting Diode (LED) Bulbs - 3 Year

LED bulb’s warranty and product life statements are based on operating the LED lamp in environments with an ambient temperature of -20° C (-4° F) to a maximum of +45° C (113° F) and are warranted for a period of 3 years, based on 3 hours of use per day – unless otherwise noted on the products packaging.
Average rated life may vary depending on application, use, fixture type and environment.
LED replacements lamps are not compatible with all photocells, timers and motion sensors and these devices can affect the performance of the products. Only LED rated devices should be used and if not, the warranty can be voided.

For Light Emitting Diode (LED) Bulbs - 5 Year

LED bulb’s warranty and product life statements are based on operating the LED lamp in environments with an ambient temperature of -20° C (-4° F) to a maximum of +45° C (113° F) and are warranted for a period of 5 years, based on 3 hours of use per day – unless otherwise noted on the products packaging.
Average rated life may vary depending on application, use, fixture type and environment.
LED replacements lamps are not compatible with all photocells, timers and motion sensors and these devices can affect the performance of the products.  Only LED rated devices should be used and if not, the warranty can be voided.

For Light Emitting Diode (LED) Bulbs - 3 Year / 10 Hours of use per day

LED bulb’s warranty and product life statements are based on operating the LED lamp in environments with an ambient temperature of -20° C (-4° F) to a maximum of +45° C (113° F) and are warranted for a period of 3 years, based on 10 hours of use per day – unless otherwise noted on the products packaging.
Average rated life may vary depending on application, use, fixture type and environment.
LED replacements lamps are not compatible with all photocells, timers and motion sensors and these devices can affect the performance of the products.  Only LED rated devices should be used and if not, the warranty can be voided.

For Light Emitting Diode (LED) Bulbs - 5 Year / 10 Hours of use per day

LED bulb’s warranty and product life statements are based on operating the LED lamp in environments with an ambient temperature of -20° C (-4° F) to a maximum of +45° C (113° F) and are warranted for a period of 5 years, based on 10 hours of use per day – unless otherwise noted on the products packaging.
Average rated life may vary depending on application, use, fixture type and environment.
LED replacements lamps are not compatible with all photocells, timers and motion sensors and these devices can affect the performance of the products.  Only LED rated devices should be used and if not, the warranty can be voided.

For Hi-Pro Light Emitting Diode (LED) Bulbs - 5 Year

The limited warranty set forth below is given by SATCO Products, Inc. with respect to SATCO Hi-Pro LED products when delivered in new condition and in its original package.

This LED lamp is designed to operate on line voltage ranging from 100V to 277V AC. If the fixture contains a ballast, it must be by-passed or removed before this LED lamp is installed. Failure to by-pass or remove the existing ballast could result in damage to the product and will void its warranty.
The operating temperature range for the Hi-Pro LED product line is: -20°C (-4°F) to a maximum of +60°C (+140°F) unless otherwise noted on the box.

When used in an enclosed fixture, the lamp must be installed in accordance with the recommended compartment size for that lamp.  Lamp life may vary depending on application, use, fixture type and environment.
Not for use in explosion proof or vapor tight fixtures.

LED replacements lamps are not compatible with all photocells, timers and motion sensors and these devices can affect the performance of the products.  Only LED rated devices should be used and if not, the warranty can be voided.

The product is warranted against defects in material and workmanship for 5 years from date of purchase, based on 12 hours per day of use. Defective products should be returned to SATCO after being contacted and a Return Goods Authorization has been obtained. Once returned product is proven defective upon inspection, the product will be repaired or exchanged.

For Compact Florescent (CFL) Bulbs

All Medium-based CFL bulbs are warranted against defects in materials and workmanship for a period of 2 years from the original date of purchase, based on 3 hours of use per day.
All GU24-based CFL bulbs are warranted against defects in materials and workmanship for a period of 3 years from the original date of purchase, based on 3 hours of use per day.

For Outdoor LED Fixtures - 5 Year

These outdoor fixtures are warranted against defects in materials and workmanship for a period of 5 years from the original date of purchase.

These warranties apply only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, Satco’s only obligation, and your exclusive remedy, is the repair or replacement of the product at Satco’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. These warranties shall not apply to any product found to have been improperly installed, set-up, or used in any way not in accordance with the product’s designed application.
Average rated life may vary depending on application, use, fixture type and environment.

Satco does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. Satco specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including any labor / expense costs involved in the replacement or repair of said product.

For T5 LED Bulbs - 5 Year

The limited warranty set forth below is given by SATCO Products, Inc. with respect to SATCO LED T5 lamps, when delivered in new condition and in its original package.

The product is warranted against defects in material and workmanship for 5 years from date of purchase. Operate according to specification, e.g., within specified input voltage, operating ambient temperature of -20° C (-4° F) to a maximum of +45° C (113° F), not-fully enclosed fixtures, and working with compatible ballasts as suggested by the vendor. Average rated life may vary depending on application, use, fixture type and environment.

Defective products should be returned to SATCO after being contacted and a Return Goods Authorization has been obtained. Once returned product is proven defective upon inspection, the product will be repaired or exchanged.

This limited warranty covers all defects encountered in normal and recommended use of the product, and does not apply to cases below:

A. Loss or damage to the product due to abuse, mishandling, alteration, accident, electrical current fluctuation, failure to follow operating, maintenance or environmental instructions prescribed by SATCO. See safety notices in or on packaging.

B. Service provided by someone other than SATCO or an authorized service provider.

C. Warranty is void if product is not used for the intention which product was manufactured or installation instructions were not properly followed as noted on the package:

Satco does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. Satco specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including any labor / expense costs involved in the replacement or repair of said product.

For T5 LED Bulbs  -  Ballast Bypass - 5 Year

The limited warranty set forth below is given by SATCO Products, Inc. with respect to SATCO LED T5 lamps, when delivered in new condition and in its original package.

The product is warranted against defects in material and workmanship for 5 years from date of purchase. Operate according to specification, e.g., within specified input voltage, operating ambient temperature of -20° C (-4° F) to a maximum of +45° C (113° F), and not-fully enclosed fixtures. Average rated life may vary depending on application, use, fixture type and environment.

Defective products should be returned to SATCO after being contacted and a Return Goods Authorization has been obtained. Once returned product is proven defective upon inspection, the product will be repaired or exchanged.

This limited warranty covers all defects encountered in normal and recommended use of the product, and does not apply to cases below:

A. Loss or damage to the product due to abuse, mishandling, alteration, accident, electrical current fluctuation, failure to follow operating, maintenance or environmental instructions prescribed by SATCO. See safety notices in or on packaging.

B. Service provided by someone other than SATCO or an authorized service provider.

C. Warranty is void if product is not used for the intention which product was manufactured or installation instructions were not properly followed as noted on the package:

Satco does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. Satco specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including any labor / expense costs involved in the replacement or repair of said product.

For T8 LED Bulbs - 5 Year

The limited warranty set forth below is given by SATCO Products, Inc. with respect to SATCO LED T8 lamps, when delivered in new condition and in its original package.

The product is warranted against defects in material and workmanship for 5 years from date of purchase. Operate according to specification, e.g., within specified input voltage, operating ambient temperature of -20° C (-4° F) to a maximum of +45° C (113° F), not-fully enclosed fixtures, and working with compatible ballasts as suggested by the vendor. The warranty is 4 years for ballasts with a BF >1.0.
Average rated life may vary depending on application, use, fixture type and environment.

Defective products should be returned to SATCO after being contacted and a Return Goods Authorization has been obtained. Once returned product is proven defective upon inspection, the product will be repaired or exchanged.

This limited warranty covers all defects encountered in normal and recommended use of the product, and does not apply to cases below:

A. Loss or damage to the product due to abuse, mishandling, alteration, accident, electrical current fluctuation, failure to follow operating, maintenance or environmental instructions prescribed by SATCO. See safety notices in or on packaging.

B. Service provided by someone other than SATCO or an authorized service provider.

C. Warranty is void if product is not used for the intention which product was manufactured or installation instructions were not properly followed as noted on the package:

Satco does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. Satco specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including any labor / expense costs involved in the replacement or repair of said product.

For T8 LED Bulbs  -  Ballast Bypass - 5 Year

The limited warranty set forth below is given by SATCO Products, Inc. with respect to SATCO LED T8 lamps, when delivered in new condition and in its original package.

The product is warranted against defects in material and workmanship for 5 years from date of purchase. Operate according to specification, e.g., within specified input voltage, operating ambient temperature of -20° C (-4° F) to a maximum of +45° C (113° F), and not-fully enclosed fixtures.  Average rated life may vary depending on application, use, fixture type and environment.

Defective products should be returned to SATCO after being contacted and a Return Goods Authorization has been obtained. Once returned product is proven defective upon inspection, the product will be repaired or exchanged.

This limited warranty covers all defects encountered in normal and recommended use of the product, and does not apply to cases below:

A. Loss or damage to the product due to abuse, mishandling, alteration, accident, electrical current fluctuation, failure to follow operating, maintenance or environmental instructions prescribed by SATCO. See safety notices in or on packaging.

B. Service provided by someone other than SATCO or an authorized service provider.

C. Warranty is void if product is not used for the intention which product was manufactured or installation instructions were not properly followed as noted on the package:

Satco does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. Satco specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including any labor / expense costs involved in the replacement or repair of said product.

For Products With An Average Rated Hours Warranty

Satco Products, Inc (Satco) warrants SATCO brand product to be free from defects in materials and workmanship for the average rated hours of the product’s designed specification. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, Satco’s only obligation, and your exclusive remedy, is the repair or replacement of the product at Satco’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the product’s designed application. Satco does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. Satco specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including any labor / expense costs involved in the replacement or repair of said product.

Submit Your Consumer Warranty Request Here

Satco offers several different warranties for our Nuvo Lighting products. Nuvo Lighting products are warrantied by Satco for a period of 1 to 5 years, depending on the type of product. This is provided that they have not been improperly installed, set up or used in any way that deviates from normal use defined by their instructions.

Defective products should be returned to Satco. To obtain return authorization, please fill out the form on our Contact Us page and select “RGA Requests” under How Can We Help You?. Once the product is returned and proven defective upon inspection by Satco, the product will be repaired or exchanged as determined by Satco.

SATCO's NUVO 1-Year Limited Warranty

Satco Products Inc. (Satco) warranties your Satco brand product and Nuvo brand lighting fixtures to be free from defects in materials and workmanship for a period of (1) year from the date of purchase. This warranty applies only to the original consumer purchaser and only to products in normal use and service. If a product is found to be defective, Satco’s only obligation, and your exclusive solution, is the repair or replacement of the product at Satco’s discretion. This is if the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set up, or used in any way that is not in accordance with the instructions supplied with the product.

Satco does not guarantee and specially disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. Satco specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including any labor / expense costs involved in the replacement or repair of said product. This warranty does not apply to Satco, Allura or Econobrite brand light bulbs, unless specifically indicated on the products package. 
 
SATCO's NUVO 3-Year Limited Warranty

Satco Products Inc. (Satco) warranties your Satco brand product and Nuvo brand ENERGY STAR lighting fixtures to be free from LED or CFL light source and electrical component defects in materials and workmanship for a period of (3) years from the date of purchase. The decorative finish of all ENERGY STAR fixtures is warrantied for a period of (1) year. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, Satco’s only obligation, and your exclusive solution, is the repair or replacement of the product at Satco’s discretion. This is if the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product.

Satco does not guarantee and specially disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. Satco specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including any labor / expense costs involved in the replacement or repair of said product. This warranty does not apply to Satco, Allura or Econobrite brand light bulbs, unless specifically indicated on the products package.

SATCO's NUVO 5-Year Limited Warranty

The purchased product is covered with a (5) year (60 months) guarantee in regards to any defect in material or workmanship after the date of purchase.

Satco shall bear no responsibility on account of guarantee, and shall bear no liability for any faults, in case of improper operation, use, negligence, accident or exposure to natural hazard, or excessive use over the limits specified for the unit, or if any unauthorized alteration or repair followed.

All consumer product return requests should be made through the retailer where the product was originally purchased. Each retailer has their own guidelines for product returns and they should be contacted directly to ensure that the correct procedures are followed. This way, you can get your claim settled in a timely manner.

Authorized Distributor Shipment Policy:

Freight:

Qualifying orders will be shipped prepaid by carrier of our choice within the continental USA. Air shipments not included. Any expense incurred for special handling, inside delivery, job sites and COD charges, etc., is the sole responsibility of the customer.

Shipment Charges:

Additional charges may apply to orders that require- drop shipment, special handling, liftgate charges or incur additional costs.

Deliveries:

If any merchandise is received in damaged condition, please report the damage to us at once and hold original carton and merchandise for inspection.

Packaging:

All shipments are packaged very carefully using standard, approved packaging methods and materials. If any damage occurs in transit, do not refuse as this will cause unnecessary shipping expenses and delays. File claim with the carrier for loss or damage. If additional packaging is required to meet special shipping requests, additional charges may apply.

Claims:

Claims must be in writing within ten days of receipt of shipment.

Returned merchandise:

All merchandise must have written authorization (RGA) before being returned. Please give us our invoice number, Item #, quantity and reason for return. There will be a 25% handling charge for merchandise returned.

You can find a dealer here,. If you are a dealer and would like to be listed, please contact you SATCO|NUVO sales representative.

Technical data, including general information, warranty, packaging, lamp technology, electrical information, photometric, certifications, MSDS, dimmer compatibility, downloadable spreadsheets and more, can be found on the item page of each SKU listed in the on-line product catalog.
 
For technical assistance, please contact SATCO|NUVO customer service at 1-800-437-2826, and they will direct you to the appropriate department.